Manufacturer and supplier of roof products and accessories for the metal building industry since 1964

R-Panel Roof Curb

R-Panel Roof Curb

R-Panel Roof Curb (High Rib Roof Curb) fits any R-Panel roof system. Curb dimensions and configuration to meet skylight or rooftop equipment requirements. Pitch correction to roof slope as specified. Rib-to-rib (R&S Layover) side flanges come standard for a complete weather tight seal. Roof curb may include a custom finish to match the roof color. R-Panel Roof Curbs install under the roof panel on the up-slope and over the roof panel on the down-slope, which results in a shingled watershed condition. In addition, a 20-Year Warranty is available on all aluminum curbs.

Roof Curbs For: HVAC | Exhaust Fans | Skylights | Gravity Vents | Pipe Penetrations

  • Description
  • Model Guide
  • Sizes and Weights
  • Documents
  • Certification

Specifications

Material 0.80 aluminum
18 GA, 14 GA or 16 GA Aluminized steel
1″ Rigid Insulation R6.5 (higher R-Values available)
Construction Full penetration welds, thoroughly tested
Mitered corners for true square top
Curb Up-slope Flange installs under panel
Panel closures welded or shipped loose
Integrated 4″ high water cricket
Min 9″ between up-slope curb wall and closures
Curb Down-slope Flange installs over panel
Caps (straps) welded or shipped loose
Minimum 3″ down-slope flange
Curb Side Flanges Rib-to-Rib, layover to next natural high rib
Minimum 3″ between curb sidewall and high ribs
Curb Top Level top when specified
Skylight curbs slope with roof
Dimensions 6″ – 8″ curb height on up-slope (custom heights available)
Finish Aluminum mill finish
Powder coat (standard colors)
Kynar (exact match)
Accessories 14 GA backer-channel
Sealants, fasteners
Certifications Engineering calcs (additional costs apply)
Warranty 20 Years (aluminum)
1 Year (steel)

TYPE IF CURB (Internally Flanged)

Same design / construction as above with the following exceptions:

Curb Up-slope Up-slope base flange breaks inward 1-1/2″
Includes 2-peice water diverter assembly and backer channel
Curb Down-slope Down-slope base flange breaks inward 1-1/2″
Integrated caps in curb wall accept panel highs
Curb Side Flanges Side base flanges break inward 1-1/2″
Backer Channel Integral backer channel Included with all IF curb kits

Options

Curb Liner Conceals insulation, mill or white finish, complete kit for install
Ridge Mount Installs on ridge condition, double pitched
Collar Top Square-to-round transition
Over / Over Up-slope and Down-slope over roof panel
Non-Insulated Cost savings when insulation not required
High R-Value 2″ thick insulation for R14 value
Damper Shelf Damper support for exhaust fan
Duct Supports Blank-offs, duct supports for HVAC equipment

Curb Model Guide

Provide roof panel make, model, seam spacing and pitch when requesting quote

Model L
x
W
x
H
Side Flanges Closures/
Caps
Upslope/
Downslope
Curb Top Insulation Material Finish Options (add all that apply)
MBR

R-Panel / High Rib

  • L: Layover
  • R: Flat Flange
  • F: Internally Flanged
1: Fixed / Welded

2: Loose / Field Located

3. None

4. Up-slope Flat, Down-slope Offset

  • U: Under / Over
  • O: Over / Over
  • L: Level
  • S: Slope w/ Roof
  • Y: Insulated
  • X: Not Insulated
  • A: Aluminum
  • G14: 14 Gauge Galvanized Steel
  • G16: 16 Gauge Galvanized Steel
  • G18: 18 Gauge Galvanized Steel
  • M: Mill
  • P: Powder Coat
  • K: Kynar
  • CL: Curb Liner
  • RM: Ridge Mount
  • CT: Collar Top
  • DS: Duct Supports

Example

MBR-48x96x8-L1SY-18AM-CL

Terminology

Closure: seals trapezoidal panel at up-slope curb opening (under panel)
Cap: seals trapezoidal panel at down-slope curb opening (over panel)
Seam Clip Side Flanges (C): side flanges integrate with roof panel seams (includes seam clip)
Layover Side Flanges (L): side flanges extend and layover next natural high rib
Flat Side Flanges (R): flat side flanges 3″ typical
Internally Flanged (F): perimeter base flange breaks / seals inside curb wall
Under / Over: up-slope installs under, down-slope installs over roof panel
Over / Over (OO): up-slope and down-slope flanges install over roof panel
Floating 2-Curb System (FC): Inner weight-bearing curb and outer flashing curb (heavy equipment)
Ridge Mount (RM): Inner weight-bearing curb and outer flashing curb (heavy equipment)
Curb Liner (CL): white or mill finish liner on inside of curb wall; conceals insulationFloating
Collar-Top (CT): square-to-round transition for pipe penetrations

All curbs custom-sized to meet project specifications. CAD drawings are provided with each curb order (submittal package) including HVAC partitions, damper shelves and panel rib/seam contour placements.

Documents

Additional curb configurations available, call for details

Product Description Model Submittal Specifications Installation Warranty
Layover Side Flanges (L) MBR-L PDF WORD PDF PDF
Flat Side Flanges (R) MBR-R PDF WORD PDF PDF
Internally Flanged (F) MBR-F PDF WORD PDF PDF
Ridge Mount (RM) MBR-R-RM PDF WORD PDF PDF
Floating 2-Curb System (FC)
Layover Side Flanges (L)
MBR-L-FC PDF WORD PDF PDF
Floating 2-Curb System (FC)
Flat Side Flanges (R)
MBR-R-FC PDF WORD PDF PDF
Floating 2-Curb System (FC)
Internally Flanged (F)
MBR-F-FC PDF WORD PDF PDF
Collar Top Adapter
Square-to-Round Transition
MBR-CT PDF WORD PDF PDF
Accessories
Backer Channel
Layover Side Flanges (L)
SUB-MBR-L PDF PDF
Backer Channel
Flat Side Flanges (R)
SUB-MBR-R PDF PDF
Backer Channel
Internally Flanged Curbs (F)
SUB-MBR-F PDF PDF

Optional engineering calcs by Structural P.E. to ensure local codes and load tolerances are met.

Check out our Product Line Card

R&S manufactures a vast array of products to fit your project needs. We aim to supply all of your metal building roof accessory needs, not just one product. Why go to multiple vendors when R&S can supply it all?