#1 GrateSafe® Roof Walkway Manufactured in the USA

Absolutely. With a vast history in the metal building sector, R&S has every roof panel type cataloged in our CAD library, ensuring our parts fit perfectly for all metal roofs, including Standing Seam, R-panel, and insulated metal panel systems.

For roofs with a pitch over 2:12, pitch correction might be needed to create a level walkway. This applies mainly to perpendicular walkways, except for specific platforms requiring a flat surface for access or service areas.

Yes, all GrateSafe® handrail systems comply with stringent OSHA standards for rail height and load capacity, ensuring worker safety.

GrateSafe is offered in 18 GA Steel, 14 GA Steel, and 0.080 Aluminum. The 18 GA steel is preferred for its strength and weight balance, while aluminum is ideal for corrosion resistance or lighter weight needs.

Walkways are made from 12” wide planks that interlock for adjustable widths (24”, 36”, 48”, etc.). We don’t recommend a standalone 12” walkway for safety reasons.

R&S’s advantage is our comprehensive in-house manufacturing in the USA. Unlike competitors who may outsource, we control the quality, cost, and delivery times of our support systems and walkway gratings, ensuring the best value and reliability.

• Standing Seam Roofs: No holes needed. We use S-5!® Clamps to attach the base supports directly to the roof without any screws required.
• R-Panel Roofs: You have two choices. You can use fasteners that attach the supports to the underlying structure or Fab-Lok® Fasteners that connect directly to the roof panel. This also applies to corrugated roofs.
• Insulated Metal Panels (IMP): The installation depends on whether the IMP is more like a Standing Seam or R-Panel roof. We adjust the support lengths and reinforce them for the wider spacing typical of IMPs (40”-42”).

R&S provides a complete list of parts and a CAD-based layout showing where each of these parts go. This includes the placement of supports, handrail fittings, S-5!® Clamps, and other parts. You’ll also get a general installation overview, detailed instructions for base supports/hardware, and guides for installing S-5! Clamps or Fab-Lok® Fasteners.

No, GrateSafe® systems are designed for quick installation. They’re modular, so once your team gets the hang of it, installation moves swiftly. Plus, we’re here to help guide you through the process for a smooth start.

Yes, adding to your GrateSafe® system is easy thanks to its modular design. This flexibility is perfect for phased projects or when new equipment is added to a roof.

• Roof Type: Let us know your roof type (e.g., 24″ Standing Seam, 12″ R-Panel Screw Down, 16″ Vertical Standing Seam). If you have the make and model of the roof panel, that’s all we need.
• Length of Walkway: Tell us how long you need the walkway. This includes lengths both parallel and perpendicular to the roof seams or high ribs.
• Walkway Width: Our walkways come in 12″ increments. The most common widths are 24″ or 36″ for access paths, while platform widths can vary.
• Handrail Needs: Do you need handrails? Specify if they’re required on one or both sides of the walkway and if there are specific sections where they’re needed.
• Pitch Correction: We offer pitch correction for walkways running perpendicular to the roof seams when the slope is steeper than 2:12.
• Toe Kick Board: If you need a toe kick board (a 6″ high guard to stop objects from rolling off the roof), please mention it.

We provide a 1-year manufacturer’s warranty on all our roof walkway systems.

Yes, we can arrange for a trusted third-party engineering firm to provide calculations for OSHA compliance. This is an additional fee-based service.

Delivery times depend on the order size. Here are some general guidelines: small orders (0-500 lineal feet) within 1-2 weeks, medium orders (500-1,500 lineal feet) in 2-3 weeks, and larger orders (over 1,500 lineal feet) around 4 weeks. We always consider your project timeline to ensure timely delivery.