Manufacturer and supplier of roof products and accessories for the metal building industry since 1964

Continuous Ridge Vent

Gravity Ridge Ventilators

Gravity ridge vents are a low cost method of ventilating large open floor plans that don’t require air conditioning. Typically used in conjunction with louvered air intake systems, these vents provide weather resistant ridge openings that may be regulated with a damper. Continuous installation allows operation in banks of multiple sections, and may be motorized with actuators.

  • Description
  • Model Guide
  • Sizes and Weights
  • Documents

Standard Design Specifications

Design Ridge mount design with extra-long flashing that installs via roof panel closures (by others)
Installation Single unit or continuous allowing operation in banks of multiple sections
Dimensions 5′ or 10′ Lengths
Throat Sizes 9″, 12″, 18″, 24″ & 36″ clear throat openings
Damper Operable damper assembly (manual or actuated)
Pull Chain 15′ chain standard
End Caps Accommodates up to 6:12 pitch
Drainage Interior diverter directs water to drainage slots beneath wind bands
Gussets Single piece heavy gauge gussets for long-term durability
Flashing Continuous / end cap flashing components provided with all vents
Screen 1/2″ mesh 0.063″ aluminum or 1/2″ mesh 19 GA galvanized steel
Crate Individually crated for LTL or flatbed freight
Finish Pre-Coat White, Galvalume w/ Clear Coat, Aluminum Mill, Powder Coat or Kynar
Warranty 1 year

Gravity Ridge Ventilator Options

No Damper Cost reduction option when dampers not required
Knock Down Ridge Vents shipped disassembled to reduce freight costs
Curb Mount Base Curb mount base in lieu of ridge mount flashing
Metal Building Closures Formed to roof profile, includes sealants and fasteners
Operators
(See Documentation for Details)
Extended Chain Kit
Lever Operator Kit
Winch Operator Kit
Electronic Actuator (factory installed, 5 unit maximum per actuator)
Insect Screen Replace standard bird screen with insect screen when specified

Ridge Vent Model Guide

Model R
V
9
12
18
24
36
G
A
S
W
M
S
D K
L
I
M
Throat Width

  • 9=9″
  • 12=12″
  • 18=18″
  • 24=24″
  • 36=36″
Material

  • G=Galvanized
  • A=Aluminum
  • S=Stainless Steel
Finish

  • W=White
  • M=Mill
  • S=Special Color or Finish
Damper Option

  • D=Damper
Special Features

  • K=Knock Down
  • L=Non-Standard Length
  • I=Insect
    Screen
Damper Operator

  • M=Motorized

Example

RV12-G-W-D is a 12″ ridge vent, 10′ long, constructed with white pre-coat galvalume steel and with a manually operated damper

Standard Sizes and Shipping Weights

Model Crate Outside Dimensions (w x h x l) Weight (GALVALUME – LBS)
RV9 30″ x 20″ x 123″ 125
RV12 34″ x 25″ x 123″ 175
RV18 50″ x 33″ x 123″ 375
RV24 67″ x 46″ x 123″ 600
RV36 90″ x 56″ x 123″ 1050

 

Documents

Product Description Model Submittal Specifications Installation Warranty
RV 9″-36″ x 10′ Ridge Vent
Standard Ridge Condition
RV 9,12,18,24,36 PDF WORD PDF PDF
RV 9″-36″ x 10′ Ridge Vent
Varco Pruden, Butler SSR
RV-VPBSSR 9,12,18,24,36 PDF WORD PDF PDF
RV 9″-36″ x 10′ Ridge Vent
Curb Mount Base
RV9,12,18,24,36 PDF WORD PDF PDF
Options Model Submittal Installation
End Wall Lever/Winch Operator RV9-12 Lever EW PDF
Side Wall Lever/Winch Operator RV9-12 Lever SW PDF
Knock Down Assembly RV9-24 KD Assembly PDF

Check out our Product Line Card

R&S manufactures a vast array of products to fit your project needs. We aim to supply all of your metal building roof accessory needs, not just one product. Why go to multiple vendors when R&S can supply it all?